Showing 1–15 of 28 results

Stulberg Leg Positioner | DSC-2620

$3,555.00 DSC-2620
  • Total Knee Positioner
  • tilt, rotate, flex, or  flex knee
  • Aluminum foot piece
  • quick release adjustments
  • gas sterilizable
  • Dimensions: 20"L x 10.5"W base
  • 3 disposable sterile pads included
  • Requires a Clark Socket
  Sterile Protective Pad & Wraps 

Robb Leg Positioner | Knee Surgery Positioner- DSC-2630-11

$2,395.00 DSC-2630-11
  • Slotted base allows the leg to be easily flexed or extended during knee surgery
  • Slots are also designed to allow the foot piece to be rotated
  • The complete unit is steam and gas sterilizable
  • Supplied with a sterilizable table clamp which can be clamped over the sterile drape to the O.R. table side bar
  • Three (3) Sterile Pads/Wraps are included with each new purchase
  • Similar to the Alvarado Knee Holder
  • This version has an Aluminum Foot piece
Sterile Protective Pad & Wraps 

TKR Knee Positioner | Total Knee Replacement

$4,895.00$5,195.00 DSC-800-0141 or DSC-800-0171
  • Newly designed model
  • Track Locking Bracket securely locks the Base Plate to the table with two thumb screws
  • Locks in any position with a simple turn of the wrist
  • Smooth sliding motion for effortless leg positioning
  • Well leg lies flat – eliminating the need for well-leg positioners
  • All components are autoclavable
  • Now included Sterilization Tray
  • Required CamLoc Clamp sold separately (DSC-800-0271)
  • Available in 24" or 30" base length
    • DSC-800-0141 24" Base
    • DSC-800-0171 30" Base

Hermanator Foam Knee Positioning Pad – Sterile

$374.00 DSC-112001
  • Sterile foam pad to be used in surgical knee positioners
  • 10 per case
  • Made in the USA
  • Sterile
For Use With
  •  KNEE POSITIONER 803 AND 803-S
  • ZIMMER® Alvarado Knee Holder 1320-000-00
  • SCHUREMED TKR Knee Positioner
  • INNOMED ROBB Knee Positioner
Substitute For: 
  • Knee Positioner Pad 294-P-10 and 803-P-10
  • ZIMMER® Alvarado Disposable Liner 00-1320-015-10
  • INNOMED® Sterile Protective Pad 2629-00
  • SCHUREMED TKR Disposable Liner 800-1414

Adjustable Knee Crutch Supports

$1,250.00 BD170
  • These now include an adjustable extension to allow for abduction at no additional cost
  • The knee crutch itself is approx. 9.5" wide and 12" long (5" above the knee bend and 7" below the knee bend)
  • Includes the doughy soft pads. Sold as a pair
  • Simple, ergonomic, locking handle
  • Easy to set up and position
  • These require 2 Clark Sockets.(BD-CS) or Schure Socket XL (DSC-800-0134)

Knee Crutches

$1,049.00 DSC-800-0041
  • Constructed of highest-quality stainless steel
  • Extremely soft and comfortable crutch liners prevent superficial nerve damage to the patient
  • Facilitate a wide-range of patient positions for surgery
  • Adjust vertically from 12″ to 19″
  • Rotates 360º
  • Mount to side rail quickly and securely
  • provide precise patient positioning with a simple, ergonomic, locking handle
  • Knee crutch pads included
  • Requires 2 Clark sockets (BD-CS)
  • Sold in pairs

Arthroscopic Leg Holder

$1,295.00 BD250
  • Smooth, unidirectional locking mechanism enables the caregiver to set rigid fixation with one-hand operation
  • Hinged upper brace accommodates all sized patients
  • Structurally enhanced design enables staff to apply pressure both medially and laterally
  • One handed fixation with Velcro® Strap
  • 22 adjustable width locations
  • can accommodate up to a 12" wide leg
  • Stainless Steel Round 5/8" post

Disposable Arthroscopic Leg Holder Foam Pad

$206.00 BD250P-12
  • Disposable foam insert for Arthroscopic Leg Holder
  • 2 part foam
    • outer foam is dense low compression
    • inner foam is soft compression foam
  • Hook & Loop closure
  • Case of 12
  • Single patient use
  • Can be used on many style Arthroscopic Leg Holders

Rigid Foam Insert for Arthroscopic Leg Holder

$299.00 BD250-SSP20
  • Dense white foam
  • Rigid compression support
  • Foam insert for leg holder
  • Can be used on many style leg holders
  • Fits BD250  arthroscopic leg holder
  • Case of 20
  • Non-sterile

Gel Insert for Leg Holder

$158.00 BD2500
  • Reusable Gel insert
  • Designed for Arthroscopic Leg Holders
  • Fits many style leg holders
  • offers limited compression
  • Dimensions:
    • 4" x 36" x 3/8" Thick

Well Leg Holder | Reusable

$279.00 BB-WLH
  • Reusable well holder
  • SheerCare covering
  • Arthroscopic leg holder
  • Compressed packaging saves space
  • Protects and supports the non-operative well leg from acute pressure points

Radiolucent Total Knee Stabilizer for Flexed Leg Support

$300.00 DSC-TKS-R
    • Radiolucent design
    • MR safe
    • Supports the knee during arthroscopic procedures
    • Offers stable support to a flexed leg during total knee procedures
    • 16.5" round stainless steel rod allows for height adjustment at the rail
    • White stabilizer is 11" L x 2" thick
    • Comes with one disposable foam pad
    • Required clark socket (BD-CS)
    • Extra pads sold separately (SKU# DSC-TKS-PAD)

Total Knee Stabilizer Replacement Pads (10 per case)

$105.00 DSC-TKS-PAD
  • Replacement pads for DSC-TKS
  • Covers the foot for added patient comfort
  • 10 per case
NOTE: Full structural frame is available: (DSC-TKS)

Arthroscopic Stress Post

$340.00 DSC-SP
  • Doughy-soft pressure management pad for maximum patient safety and comfort
  • Performs as a fulcrum for improved access to the medial compartment of the knee
  • The 3½" x 9" aluminum post surface is covered with a 2½" thick premium pressure management pad
  • The 12" long x 5/8" diameter stainless steel mounting post fits into a standard side rail clamp which is sold separately.
  • BD-CS is our recommended clamp

Shutt Universal Stress Post

$2,199.00 DSC-SP-LNVRT
  • Break-away design allows use of "figure 4" position for meniscal repair procedures
  • Hook-and-loop closure insert grips tourniquet.
  • Foam inserts minimize patient trauma