David Scott Company offers a wide variety of surgical positioning products, click here to view all Knee Positioners
Lombardi Leg Positioner
$1,050.00
Designed to hold the leg during total knee surgery
Unrestricted design helps to allow for manipulation of the leg
- The foot piece consists of an open topped boot, separated with four spaces and attached to a boot support plate
- The support plate is bent beyond the rear of the boot to help provide support in different positions of flexion/extension
- The spacers allow for room to clean between the boot and the support plate
Expressed Warranty
Our Number one concern with all customers is their complete satisfaction. We have applied this principle for over 40 years. We strive to satisfy all of our customer’s requests. Should any product we manufacture prove to fail you due to a manufacturing defect we will attempt to correct the situation however it is deemed necessary. This may be in the form of a replacement, repair or credit. We believe our products to be of the finest quality materials manufactured to the highest standards; If for any reason you have concern with this please do not hesitate to notify us immediately.
We proudly back our Blue Diamond® Gel Positioners, Bean Bags Positioners, & SchureMed Positioning products with an unprecedented 2-Year manufacturers defect warranty.
All other products on this site including but not limited to Foam Products, Hand Tables, Anesthesia Products, Leg Holders and Restraints shall be deemed free from any defects in material and workmanship for 1 year. What is not covered in our expressed warranty are product punctures, tears, neglect or abuse.
Thank you for your continued support.
~David Scott Company~
You may also like…
Fromm Knee Triangles
Stulberg Leg Positioner | DSC-2620
- Total Knee Positioner
- tilt, rotate, flex, or flex knee
- Aluminum foot piece
- quick release adjustments
- gas sterilizable
- Dimensions: 20"L x 10.5"W base
- 3 disposable sterile pads included
- Requires a Clark Socket
Related products
Adjustable Knee Crutch Supports
- These now include an adjustable extension to allow for abduction at no additional cost
- The knee crutch itself is approx. 9.5" wide and 12" long (5" above the knee bend and 7" below the knee bend)
- Includes the doughy soft pads. Sold as a pair
- Simple, ergonomic, locking handle
- Easy to set up and position
- These require 2 Clark Sockets.(BD-CS) or Schure Socket XL (DSC-800-0134)
Kirschenbaum Leg Holder
Foam Positioning Bolsters & Rolls
- 20" x 6"
- 26" x 6"
- 12" x 8"
- Covered Foam rolls
- Reusable, cleanable bolster rolls
- High Density Foam
- Fusion stretchable covering
- Custom sizes available
Lower Extremity Leg Positioner
Cherf Leg Holder
- Useful for all lower extremity procedures, particularly helpful for supporting the leg in lateral position
- Allows knee to be locked into extension which helps eliminate the need for manual support.
- The leg holder may also be used to support the limb for surgical patients in the supine position such as for knee and foot/ankle procedures.
Picket Fence Leg Prepper
- Used for prepping legs for surgery.
- Attaches to OR table rail with Clark socket, sold separately (BD-CS)
- Constructed from stainless steel
- Preps both legs at once
Single Loop Leg Prepper w/ pad
- Stainless steel mounting post adjusts prepper height up to 30"
- Wipe-clean molded polyurethane pad
- Leg support can also serve to run cables, tubes over OR table
- Durable stainless steel design
- Mounts using 5/8" rail clamps (BD-CS)
- Includes single protective foam pad
- Dimensions:
- Trough: 6" wide x 5.5" deep
- Top of bracket: 13" in total length
- Height of rod: 33" tall
- Replacement Pads Available
Arthroscopic Leg Holder
- Smooth, unidirectional locking mechanism enables the caregiver to set rigid fixation with one-hand operation
- Hinged upper brace accommodates all sized patients
- Structurally enhanced design enables staff to apply pressure both medially and laterally
- One handed fixation with Antimicrobial Strap
- 22 adjustable width locations
- can accommodate up to a 12" wide leg (35" circumference)
- Stainless Steel Round 5/8" post
- Accommodates patient weight up to 500 lbs.
- Product dimensions; 12" x 2.5" x7.5"
Reviews
There are no reviews yet.